How to measure your window for your custom blinds?

Complete Guide to Measure Your Windows and Ensure Perfect Blind Installation

Measuring your windows correctly is the first step to ensuring a perfect blind installation. Accurate measurement ensures that the blinds fit correctly, providing both functionality and a flawless aesthetic finish. In this guide, we teach you step by step how to take the measurements of your windows so that you can buy and install your custom blinds with complete confidence.

1. Installation Types: Indoor and Outdoor

Before you start measuring, you need to decide whether the blinds will be installed inside the window frame (interior installation) or outside the frame (exterior installation). Each type of installation requires a different measurement approach.

2. Measurement for Indoor Installation

Window Width: Measures the width of the window at three points: the top, the center and the bottom. Note the smallest measurement of the three, as the windows may not be perfectly square. This will be the width measurement for the interior installation.

Window Height: Measure the height of the window at three points: the left side, the center and the right side. Write down the largest measurement of the three. This will be the height measurement for the interior installation.

Frame Depth: Make sure the window frame is deep enough to accommodate the blind or curtain. Measure the depth from the front of the frame to the deepest point.

3. Measurement for Outdoor Installation

Window Width: Measures the total width of the window, including the frame. Add 10cm to each side (20cm total) to ensure the blinds completely cover the window and block light effectively.

Window Height: Measure the total height of the window, from the point where you want the blinds to start to where you want them to end. Add 10cm top and bottom (20cm total) for full coverage.

4. Additional Tips

Record Measurements: Write down all measurements on paper. It is helpful to draw a simple diagram of the window and note the measurements on the drawing to avoid confusion.

Determine the Side of Control: Depending on what your space is like, it is important that you determine if you want control on the right or left side.

Double Check: Always double check your measurements to make sure they are accurate. This will avoid costly mistakes when purchasing curtains or blinds.

Level Measurements: Use a level to ensure your measurements are straight and accurate, especially if the installation is outside.

Consider Mounting Space: Be sure to consider the space needed for brackets and other mounting hardware that may affect the final size of the curtains or blinds.

By following these steps and tips, you will be well prepared to measure your windows and ensure a perfect installation of your blinds. Good luck with your project!